DEVELOPMENT OF IMPROVED CONSTRUCTION OF BALL MILL DRUM COVERS

Article Sidebar

HTML (Uzbek) PDF (Uzbek)
Published: 26.04.2025
DOI: https://doi.org/10.70769/3030-3214.SRT.3.2.2025.10
Keywords:
ball mill, plating, coefficient, failure, efficiency, size, working member, improved, base, durability, working duration, element, bulge, lifters

Main Article Content

Abduazizov, N.
Проректор по учебной работе Навоийский государственный горно-технологический университет, профессор Навои, Узбекистан , Navoiy davlat konchilik va texnologiyalar universiteti o‘quv ishlari bo‘yicha prorektori, professor Navoiy, O‘zbekiston , Vice-rector for academic affairs of Navoi State University of mining and Technology, Navoiy, Uzbekistan
Abdullayev, S.
Старший преподаватель кафедры «Горная электромеханика», Навоийский государственный горно-технологический университет Навои, Узбекистан , Navoiy davlat konchilik va texnologiyalar universiteti “Konchilik elektr mexanikasi” kafedrasi katta o‘qituvchisi Navoiy, O‘zbekiston , Senior Lecturer, Department of “Mining electrical mechanics”, Navoi State University of mining and technology Navoiy, Uzbekistan

Abstract

In this scientific paper, a significant role in the study of the main causes of factors affecting the failure of ball mills is played by the rate of slip on the surfaces of coatings at the expense of the friction forces that occur between the coating and the load current. Changing the slip rate has a major effect on the quality characteristics of the decay processes that determine the decay intensity. A change in the value of a certain pressure mainly only leads to a change in the intensity of Decay. The decay of Mill drum protectors will have different values depending on the location of the covers. In addition, this article shows the types of ore milling mills operating in hydrometallurgical plants under the Navoi mining and Metallurgical Combine JSC and their share, failure cases and coating failures. Based on the experiment conducted, coatings of improved new construction for the cylindrical part of their drum were proposed in order to reduce the duration of interruptions of ball mills, and the results obtained on their effectiveness were presented.


 

Downloads

Download data is not yet available.

Article Details

Issue

Vol. 3 No. 2 (2025)

Section

Mining, Metallurgy, and Manufacturing Industry
Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

Public License Terms
(For Open Journal Systems (OJS))

  1. Copyright:
    The copyright of the published article remains with the author(s). However, after publication, the article is distributed on the OJS platform under the Creative Commons (CC BY) license.

  2. License Type:
    This article is distributed under the Creative Commons Attribution 4.0 International (CC BY 4.0) license. This means users can utilize the article under the following conditions:

    • Copy and distribute: The text of the article or its parts can be freely distributed.
    • Quote and analyze: Parts of the article can be used for quoting and analysis.
    • Free use: The article can be freely used for research and educational purposes.
    • Attribution: Users must provide proper attribution and reference to the original source.

  3. Commercial use:
    The article can be used for commercial purposes, provided that authorship and source are properly cited.

  4. Document modification:
    The text or content of the article can be modified or adapted, as long as it does not harm the authorship.

  5. Liability disclaimer:
    The author(s) are responsible for the accuracy of the information contained in the article. The editorial team of the platform is not liable for any damages resulting from the use of this information.

  6. Public usage obligations:
    The content of the article must be used only in accordance with legal and ethical standards. Unauthorized use is strictly prohibited.

Note:
These license terms are designed to ensure transparency and openness in material usage. By accepting these terms, you agree to the adaptation and distribution of the article content under the terms of the Creative Commons license.

Link: Creative Commons Attribution 4.0 International (CC BY 4.0)

How to Cite

Abduazizov , N., & Abdullayev , S. (2025). DEVELOPMENT OF IMPROVED CONSTRUCTION OF BALL MILL DRUM COVERS. Digital Technologies in Industry, 3(2), 15-19. https://doi.org/10.70769/3030-3214.SRT.3.2.2025.10

References

1. Перов В.А., Андреев Е.Е., Биленко Л.Ф. Дробление, измельчение и грохочение полезных ископаемых. – Санк-Петербург, 2007. – 440с.

2. Болобов В.И., Баталов А.П., Бойцов Ю.П., Бочков В.С. О возможности увеличения срока службы футеровки шаровой мельницы // Горный журнал. 2014. С. 100 – 106.

3. Болобов В.И., Баталов А.П., Бойцов Ю.П., Чупин С.А. Износостойкость стали 110Г13Л в различных абразивных средах. Санк-Петербург. 2014. С. 17–22.

4. Doll A. G. SAG Mill + Ball Mill circuit sizing. 2013. Доступно на sagmilling.com.

5. Wei Liu, Weimin Liu, Hongchao Ji, Xuefeng Tang, Mingming Wang, Changzhe Song, Xiaoming Yang. Hot deformation behavior and hot working map of MN-CR-Ni-Co steel for ball mill liner forging process // Journal of Materials Research and Technology 30 (2024), 2024. 5685-5700 p. DOI: https://doi.org/10.1016/j.jmrt.2024.04.182

6. Klas-Goran Eriksson Развитие систем мельничных футеровок /Gunder Marklund, А.Л. Гребенешников, В.Ю. Фищев // Горная промышленность. – 2003. - № 1(43).

7. Ball mill simulation in wet grinding using a tumbling mill and its correlation to grinding rate / H. Mori, H. Mio, J. Kano, F. Saito // Powder Technology. – 2004. – Vol. 143 – 144. – P. 230 – 239. DOI: 10.1016/j.powtec.2004.04.029. DOI: https://doi.org/10.1016/j.powtec.2004.04.029