MAVHUM QAYNASH QATLAMLI QURITISH QURILMASINI MODELLASHTIRISH VA OPTIMALLASHTIRISH
Maqola Yon paneli
Maqolaning Asosiy Qismi
Annotatsiya
Ushbu maqolada mavhum qaynash qatlamli quritish qurilmasining matematik modeli ishlab chiqilgan va quritish jarayonining asosiy texnologik parametrlarining ta’siri tahlil qilingan. Modelda gaz va qattiq fazalar o‘rtasidagi gidrodinamik, issiqlik va massa almashinuvi jarayonlari, namlik hamda energiya balanslari hisobga olingan. Minimal mavhumlanish tezligini aniqlashda Archimedes va Reynolds sonlaridan foydalanilgan. Hisoblash natijalariga ko‘ra, minimal mavhumlanish tezligi 0,86 m/s, ishchi gaz tezligi 1,20 m/s deb belgilangan. Quritish temperaturasi va gaz tezligining ortishi quritish jarayonini jadallashtirishi aniqlangan. Matematik model yordamida materialning yakuniy namligi, quritish tezligi va davomiyligini baholash hamda optimal texnologik rejimni tanlash imkoniyati asoslangan.
Yuklab olishlar
Maqola Tafsilotlari
Bo‘lim
Ushbu asar Creative Commons Attribution 4.0 Xalqaro Litsenziyasi asosida litsenziyalangan.
Ommaviy Litsenziya Shartlari
(Ochiq jurnal tizimlari (OJS) uchun)
O‘zbekiston Respublikasi qonunchiligiga muvofiq quyidagi shartlar taqdim etiladi:
-
Mualliflik huquqi:
Chop etilgan maqolaning mualliflik huquqi muallif(lar)ga tegishli bo‘lib qoladi. Shu bilan birga, maqola OJS platformasida chop etilgandan so‘ng, uning kontenti Creative Commons (CC BY) litsenziyasi asosida tarqatiladi. -
Litsenziya turi:
Ushbu maqola Creative Commons Attribution 4.0 International (CC BY 4.0) litsenziyasi asosida tarqatiladi. Bu shuni anglatadiki, foydalanuvchilar ushbu maqolani quyidagi shartlarda qayta ishlatishlari, bo‘lishishlari va qayta ishlashlari mumkin:- Nusxa ko‘chirish va tarqatish: Maqola matni yoki uning qismlari nusxasi erkin tarqatilishi mumkin.
- Iqtibos keltirish va tahlil qilish: Maqoladan qismlar iqtibos sifatida foydalanilishi mumkin.
- Erkin foydalanish: Tadqiqot va o‘quv jarayonlari uchun maqoladan erkin foydalanish huquqi mavjud.
- Muallifga havola qilish: Foydalanuvchilar maqola muallifini to‘g‘ri ko‘rsatishi va asl manbaga havola berishi lozim.
-
Kommersiyaviy foydalanish:
Ushbu maqoladan tijorat maqsadlarida foydalanishga ruxsat beriladi, ammo mualliflik va manbaga havola majburiy hisoblanadi. -
Hujjatni o‘zgartirish:
Maqolaning matni yoki mazmunini o‘zgartirish, uni qayta ishlash mumkin, lekin har qanday o‘zgarishlar mualliflikka salbiy ta’sir ko‘rsatmasligi kerak. -
Mas’uliyat cheklovi:
Muallif(lar) maqola tarkibidagi ma’lumotlarning to‘g‘riligiga javobgar bo‘lib, platforma tahririyati mazkur ma’lumotlardan foydalanish natijasida kelib chiqadigan har qanday zarar uchun javobgarlikni o‘z zimmasiga olmaydi. -
Ommaviy foydalanish majburiyatlari:
Ushbu maqola mazmuni faqat qonuniy va axloqiy talablar asosida ishlatilishi kerak. Noqonuniy foydalanish qat’iyan man etiladi.
Izoh:
Mazkur litsenziya shartlari mualliflar va foydalanuvchilar o‘rtasida ochiq va shaffof foydalanishni ta’minlashga qaratilgan. Bu shartlarni qabul qilish orqali, siz maqola mazmunini Creative Commons litsenziyasiga muvofiq qayta ishlash va tarqatishga rozilik bildirasiz.
Havola: Creative Commons Attribution 4.0 International (CC BY 4.0)
Iqtibos keltirish tartibi
Adabiyotlar ro‘yxati
[1] Nguyen, V. D., Nguyen, T. V. L., Nguyen, N. A., Kharaghani, A., & Le, K. H. (2026). Fluidized bed drying modeling: Impact of initial solid mass on drying kinetics. Chemie Ingenieur Technik, 98, 292–303. https://doi.org/10.1002/cite.70064 DOI: https://doi.org/10.1002/cite.70064
[2] Liu, T., Yin, Y., & He, D. (2026). Numerical simulation of pharmaceutical particle drying in a gas-solid fluidized bed using the CPFD method. Drying Technology, 44(2), 217–231. https://doi.org/10.1080/07373937.2025.2608266 DOI: https://doi.org/10.1080/07373937.2025.2608266
[3] Nadda, M., Banaeizadeh, A., Avilala, P., Roy, S., & Yadav, A. (2025). Coupled computational fluid dynamics-discrete element method (CFD-DEM) modeling of moisture removal in a fluidized bed dryer for heterogeneously coated solids. Chemical Engineering Science, 316, 121811. https://doi.org/10.1016/j.ces.2025.121811 DOI: https://doi.org/10.1016/j.ces.2025.121811
[4] Chen, H., Yang, C., Miyazaki, T., Kim, Y.-D., Shahzad, M. W., & Thu, K. (2025). Mathematical modeling of fluidized bed drying system: Review and state of the art. Evergreen, 12(2), 1336–1368. https://doi.org/10.5109/7363513 DOI: https://doi.org/10.5109/7363513
[5] Yang, K., Li, X., Wang, Y., & Du, X. (2025). CFD-DEM simulation study on heat and mass transfer of wheat particles in gas-solid fluidized bed. Journal of Food Process Engineering, 48(1), e70036. https://doi.org/10.1111/jfpe.70036 DOI: https://doi.org/10.1111/jfpe.70036
[6] Zanone, A., Zamboni do Carmo, G., Ropke, M., Penteriche, M. R. D., Calciolari, R. M., & Andreola, K. (2025). Predicting moisture content in microcrystalline cellulose during fluidized bed drying using machine learning techniques. Journal of Food Process Engineering, 48(5), e70119. https://doi.org/10.1111/jfpe.70119 DOI: https://doi.org/10.1111/jfpe.70119
[7] Billah, M. T., Zannat, N. E., Hossain, M. A., Sachcha, I. H., Yasmin, S., & Sarker, M. S. H. (2025). Process optimization of fluidized bed drying for water spinach: Evaluating the effect of blanching through RSM and ANN models. Food Science & Nutrition, 13(4), e70114. https://doi.org/10.1002/fsn3.70114 DOI: https://doi.org/10.1002/fsn3.70114
[8] Touil, A., Gritli, S., & Taieb, A. (2025). Mathematical modeling of batch fluidized bed drying of alumina. American Journal of Mechanics and Applications, 12(1), 11–21. https://doi.org/10.11648/j.ajma.20251201.12 DOI: https://doi.org/10.11648/j.ajma.20251201.12
[9] de Munck, M. J. A., Peters, E. A. J. F., & Kuipers, J. A. M. (2024). CFD-DEM modeling and validation of solids drying in a gas-fluidized bed. Chemical Engineering Science, 291, 119922. https://doi.org/10.1016/j.ces.2024.119922 DOI: https://doi.org/10.1016/j.ces.2024.119922
[10] Jin, H., Wu, Q., Wang, S., & He, Y. (2024). Heat and mass transfer performance of non-spherical wet particles in a fluidized bed dryer. Applied Thermal Engineering, 236, 121780. https://doi.org/10.1016/j.applthermaleng.2023.121780 DOI: https://doi.org/10.1016/j.applthermaleng.2023.121780
[11] Simanjuntak, M. E., Sitorus, M. B. H., Kamila, I., & Ginting, B. B. (2024). Kinetic analysis and mathematical modeling of low-rank coal drying by using swirl fluidized bed dryer on varied angles of guide vane and temperatures. Energy Sources, Part A: Recovery, Utilization, and Environmental Effects, 46(1), 3263–3277. https://doi.org/10.1080/15567036.2024.2317435 DOI: https://doi.org/10.1080/15567036.2024.2317435
[12] Ma, Z., Tu, Q., Liu, Z., Xu, Y., Ge, R., & Wang, H. (2023). CFD-DEM investigation of the gas-solid flow characteristics in a fluidized bed dryer. Chemical Engineering Research and Design, 196, 235–253. https://doi.org/10.1016/j.cherd.2023.06.054 DOI: https://doi.org/10.1016/j.cherd.2023.06.054
[13] Vandeputte, T., Ghijs, M., Van Hauwermeiren, D., Schultz, E. D. S., Schäfer, E., Stauffer, F., De Beer, T., & Nopens, I. (2023). Mechanistic modeling of semicontinuous fluidized bed drying of pharmaceutical granules by incorporating single particle and bulk drying kinetics. International Journal of Pharmaceutics, 646, 123447. https://doi.org/10.1016/j.ijpharm.2023.123447 DOI: https://doi.org/10.1016/j.ijpharm.2023.123447
[14] Hasibuan, R., Sari, W. N., Manurung, R., & Alexander, V. (2023). Drying kinetic models of rice applying fluidized bed dryer. Mathematical Modelling of Engineering Problems, 10(1), 334–339. https://doi.org/10.18280/mmep.100138 DOI: https://doi.org/10.18280/mmep.100138
[15] Tu, Q., Ma, Z., & Wang, H. (2023). Investigation of wet particle drying process in a fluidized bed dryer by CFD simulation and experimental measurement. Chemical Engineering Journal, 452, 139200. https://doi.org/10.1016/j.cej.2022.139200 DOI: https://doi.org/10.1016/j.cej.2022.139200