NUQTAVIY QARSHILIK PAYVANDLASH ELEKTRODLARIGA QO‘YILADIGAN TALABLAR VA VOLFRAM–MIS KOMPOZITLARINI BAHOLASH MEZONLARI

Maqolaning Asosiy Qismi

Baxadirov, K.G.
https://orcid.org/0000-0002-5436-2205
Xakimov, S.B.
https://orcid.org/0009-0004-1817-4559

Annotatsiya

Mazkur maqolada nuqtaviy qarshilik payvandlash jarayonida qo‘llaniladigan elektrod materiallariga qo‘yiladigan funksional talablar hamda volfram–mis (W–Cu) kompozitlarining ushbu talablarga muvofiqligini baholash mezonlari tadqiq etilgan. Tadqiqotning asosiy maqsadi payvandlash elektrodlarining ishdan chiqish mexanizmlarini tizimlashtirish, ularning ekspluatatsion xususiyatlarini belgilovchi asosiy omillarni aniqlash va W–Cu kompozitlarini elektrod materiali sifatida qo‘llash imkoniyatlarini ilmiy jihatdan baholashdan iborat. Tadqiqot nashr etilgan ilmiy manbalarni qiyosiy tahlil qilishga asoslangan bo‘lib, elektrodlarning termik va kimyoviy degradatsiya mexanizmlari, elektr va issiqlik o‘tkazuvchanligi, yuqori haroratdagi mustahkamligi, yeyilishga chidamliligi hamda kimyoviy passivligi o‘rganilgan. Tahlil natijasida elektrod materiallari uchun beshta asosiy funksional talab ajratilib, mis qotishmalari va volfram–mis kompozitlarining fizik-mexanik xususiyatlari o‘zaro taqqoslangan. Aniqlanishicha, mis qotishmali elektrodlarning elektr o‘tkazuvchanligi xalqaro toblangan mis standarti bo‘yicha 78–88% ni tashkil etsa, W–Cu kompozitlarida ushbu ko‘rsatkich eng yuqori holatda 58,6% ga yetadi. Shu bilan birga, volfram–mis kompozitlari xona haroratida yuqori qattiqlikka ega bo‘lib, ularning ayrim tarkiblarida qattiqlik 238 HV va undan yuqori qiymatlarni tashkil etadi. Biroq yuqori haroratdagi qattiqlik, po‘lat bilan kontakt qarshiligi, rux bilan kimyoviy o‘zaro ta’siri va elektrodning xizmat muddati bo‘yicha tekshirilgan ma’lumotlarning yetarli emasligi aniqlandi. Tadqiqot natijalari W–Cu kompozitlarini payvandlash elektrodlari sifatida qo‘llash imkoniyatlarini baholashda qo‘shimcha eksperimental sinovlar zarurligini ko‘rsatadi. Olingan xulosalar elektrod materiallarini tanlash, ularning ekspluatatsion xususiyatlarini baholash va istiqbolli kompozit materiallar uchun sinov dasturlarini ishlab chiqishda amaliy ahamiyatga ega.

Yuklab olishlar

Yuklab olish ma’lumotlari hali mavjud emas.

Maqola Tafsilotlari

Bo‘lim

Kon-metallurgiya va ishlab chiqarish sanoati

Muallif biografiyalari

Baxadirov, K.G., Islom Karimov nomidagi Toshkent davlat texnika universiteti, Materialshunoslik kafedrasi

DSc, Islom Karimov nomidagi Toshkent davlat texnika universiteti, Materialshunoslik kafedrasi professori

Xakimov, S.B., Islom Karimov nomidagi Toshkent davlat texnika universiteti, Materialshunoslik kafedrasi

Islom Karimov nomidagi Toshkent davlat texnika universiteti, Materialshunoslik kafedrasi tayanch doktoranti

Iqtibos keltirish tartibi

Baxadirov, K. G., & Xakimov, S. B. o‘g‘li. (2026). NUQTAVIY QARSHILIK PAYVANDLASH ELEKTRODLARIGA QO‘YILADIGAN TALABLAR VA VOLFRAM–MIS KOMPOZITLARINI BAHOLASH MEZONLARI. Sanoatda Raqamli Texnologiyalar, 4(4). https://doi.org/10.70769/3030-3214.SRT.4.4.2026.6

Adabiyotlar ro‘yxati

[1] Biele, L., Schaaf, P., & Schmid, F. (2021). Method for contact resistance determination of copper during fast temperature changes. Journal of Materials Science. https://doi.org/10.1007/s10853- 020-05490-w

[2] Chen, W., Shi, Y., Dong, L., & et al. (2017). Infiltration sintering of WCu alloys from copper- coated tungsten composite powders for superior mechanical properties and arc-ablation resistance. Journal of Alloys and Compounds, 728, 196–205. https://doi.org/10.1016/j.jallcom.2017.08.164 DOI: https://doi.org/10.1016/j.jallcom.2017.08.164

[3] Chen, Y.-Y., Liu, Z., Meka, S. R., Huang, Y., & et al. (2025). Effect of interface structure on advanced bonding between tungsten-based materials and Cu alloys: A review. Tungsten, 7(3), 479–496. https://doi.org/10.1007/s42864-024-00313-w DOI: https://doi.org/10.1007/s42864-024-00313-w

[4] Franczak, K., Kwaśniewski, P., Kiesiewicz, G., Ściężor, W., Sadzikowski, M., Kordaszewski, S., Micek, P., Kuca, D., & Pestrak, R. (2025a). Investigation of electrode cap life made of new Cu– Cr–Zr copper alloys with scandium addition dedicated for resistance spot welding of galvanized steel sheets. Materials, 18(21), 4950. https://doi.org/10.3390/ma18214950 DOI: https://doi.org/10.3390/ma18214950

[5] Franczak, K., Kwaśniewski, P., Kiesiewicz, G., Ściężor, W., Sadzikowski, M., Kordaszewski, S., & Noga, P. (2025b). Research on zinc diffusion in the resistance spot welding process of galvanised steels using Cu-Sc and Cu-Zr alloy electrodes. Welding in the World, 70(7), 2643– 2658. https://doi.org/10.1007/s40194-025-02116-0 DOI: https://doi.org/10.1007/s40194-025-02116-0

[6] Hamedi, M., & Atashparva, M. (2017). A review of electrical contact resistance modeling in resistance spot welding. Welding in the World, 61(2), 269–290. https://doi.org/10.1007/s40194- 016-0419-4 DOI: https://doi.org/10.1007/s40194-016-0419-4

[7] Hou, C., Song, X., Tang, F., & et al. (2019). W–Cu composites with submicron- and nanostructures: Progress and challenges. NPG Asia Materials, 11, 74. https://doi.org/10.1038/s41427-019-0179-x DOI: https://doi.org/10.1038/s41427-019-0179-x

[8] Jia, Y., Guo, L., Li, W., Zhang, S., Shi, X., & Yin, S. (2026). Recent development of oxide dispersion-strengthened copper alloys for application in nuclear fusion. Journal of Nuclear Engineering, 7(1), 10. https://doi.org/10.3390/jne7010010 DOI: https://doi.org/10.3390/jne7010010

[9] Kim, Y. D., Oh, N. L., Oh, S. T., & et al. (2001). Thermal conductivity of W–Cu composites at various temperatures. Materials Letters, 51, 420–424. DOI: https://doi.org/10.1016/S0167-577X(01)00330-5

[10] Liu, J. K., Wang, K. F., Chou, K. C., & et al. (2020). Fabrication of ultrafine W–Cu composite powders and its sintering behavior. Journal of Materials Research and Technology, 9, 2154–2163. https://doi.org/10.1016/j.jmrt.2019.12.046 DOI: https://doi.org/10.1016/j.jmrt.2019.12.046

[11] Liu, T., Han, Y., Jia, D., & et al. (2024). Graphene-enhanced CuW composites for high-voltage circuit breaker electrical contacts. Applied Sciences, 14, 2731. https://doi.org/10.3390/app14072731 DOI: https://doi.org/10.3390/app14072731

[12] Long, W., Yan, Y., You, M., & et al. (2025). High-performance W–Cu composites preparation technology, modulation strategy and strengthening mechanism. Journal of Materials Research and Technology, 36, 3240–3260. DOI: https://doi.org/10.1016/j.jmrt.2025.04.040

[13] Lungu, M. V. (2019). Synthesis and processing techniques of tungsten copper composite powders for electrical contact materials – a review. Oriental Journal of Chemistry, 35, 491–515. https://doi.org/10.13005/ojc/350201 DOI: https://doi.org/10.13005/ojc/350201

[14] Matějíček, J. (2021). Preparation of W–Cu composites by infiltration of W skeletons – review. In METAL 2021: 30th International Conference on Metallurgy and Materials. Brno, Czech Republic. https://doi.org/10.37904/metal.2021.4248 DOI: https://doi.org/10.37904/metal.2021.4248

[15] Mondal, A., Upadhyaya, A., & Agrawal, D. (2013). Effect of heating mode and copper content on the densification of W–Cu alloys. Indian Journal of Materials Science, 2013, 603791. https://doi.org/10.1155/2013/603791 DOI: https://doi.org/10.1155/2013/603791

[16] Ouyang, M., Wang, C., Zhang, H., & et al. (2021). Effects of bonding treatment and ball milling on W–20 wt.% Cu composite powder for injection molding. Materials, 14, 1897. https://doi.org/10.3390/ma14081897 DOI: https://doi.org/10.3390/ma14081897

[17] Parker, J. D., Williams, N. T., & Holliday, R. J. (1998). Mechanisms of electrode degradation when spot welding coated steels. Science and Technology of Welding and Joining, 3, 65–74. https://doi.org/10.1179/stw.1998.3.2.65 DOI: https://doi.org/10.1179/stw.1998.3.2.65

[18] Rdzawski, Z., Kwaśniewski, P., Głuchowski, W., Łagoda, M., Maleta, M., Boczkal, S., & Franczak, K. (2023). Research on changes in microstructures and mechanical properties of welding caps as a result of their usage during resistance spot welding process. Archives of Metallurgy and Materials, 68(1), 295–306. https://doi.org/10.24425/amm.2023.141506 DOI: https://doi.org/10.24425/amm.2023.141506

[19] Safahi, H., Baniassadi, M., & Faraji, G. (2024). Processing of fully dense and high conductivity W–20Cu composite via copper melt infiltration into a pressed tungsten wire skeleton. International Journal of Refractory Metals and Hard Materials, 124, 106809. https://doi.org/10.1016/j.ijrmhm.2024.106809 DOI: https://doi.org/10.1016/j.ijrmhm.2024.106809

[20] Safahi, H., Sabour, M. R., Baniasadi, M., & et al. (2025). Fracture behavior of W–20Cu composite processed via copper melt infiltration into tungsten wire skeleton. Engineering Failure Analysis, 172, 109426. https://doi.org/10.1016/j.engfailanal.2025.109426 DOI: https://doi.org/10.1016/j.engfailanal.2025.109426

[21] Sheikhi, M., Valaee-Tale, M., Mazaheri, Y., & et al. (2024). Electrode lifetime in resistance spot welding of coated sheets: Experiments and modeling. Materials Today Communications, 38, 107903. DOI: https://doi.org/10.1016/j.mtcomm.2023.107903

[22] Tejado, E., v. Müller, A., You, J. H., & Pastor, J. Y. (2018). Evolution of mechanical performance with temperature of W/Cu and W/CuCrZr composites for fusion heat sink applications DOI: https://doi.org/10.1016/j.msea.2017.12.054