RESEARCH ON THE HYDROTREATING PROCESS OF HEAVY AND VACUUM GAS OIL
Article Sidebar
Main Article Content
Abstract
In this article, the main part of the heavy vacuum gas oil is the high mole concentration value of the gas-raw material mixture of hydrogen and other gases in the reactor and is collected in the liquid state, the maximum temperature in the liquid phase process is 20°C compared to the vapor phase process (380°C instead of 400°C) and the average amount of circulating gas is about 15 times higher, and the efficiency of A1-So-Mo catalysts in sulfur removal. A1-Ni-Mo catalysts are considered effective in removing nitrogen and saturated aromatic compounds and olefins.
Downloads
Article Details
Issue
Section
This work is licensed under a Creative Commons Attribution 4.0 International License.
Public License Terms
(For Open Journal Systems (OJS))
-
Copyright:
The copyright of the published article remains with the author(s). However, after publication, the article is distributed on the OJS platform under the Creative Commons (CC BY) license. -
License Type:
This article is distributed under the Creative Commons Attribution 4.0 International (CC BY 4.0) license. This means users can utilize the article under the following conditions:- Copy and distribute: The text of the article or its parts can be freely distributed.
- Quote and analyze: Parts of the article can be used for quoting and analysis.
- Free use: The article can be freely used for research and educational purposes.
- Attribution: Users must provide proper attribution and reference to the original source.
-
Commercial use:
The article can be used for commercial purposes, provided that authorship and source are properly cited. -
Document modification:
The text or content of the article can be modified or adapted, as long as it does not harm the authorship. -
Liability disclaimer:
The author(s) are responsible for the accuracy of the information contained in the article. The editorial team of the platform is not liable for any damages resulting from the use of this information. -
Public usage obligations:
The content of the article must be used only in accordance with legal and ethical standards. Unauthorized use is strictly prohibited.
Note:
These license terms are designed to ensure transparency and openness in material usage. By accepting these terms, you agree to the adaptation and distribution of the article content under the terms of the Creative Commons license.
Link: Creative Commons Attribution 4.0 International (CC BY 4.0)
How to Cite
References
1. Ахметов С А. Технология глубокой переработки нефти и газа: Учебное пособие для вузов. — Уфа: Гилем, 2002. — 672 С.
2. Баннов П. Г. Процессы переработки нефти: В 3 т. — М.: Изд-во ЦИНТИхимнефтьемаш, 2000—2003. — Ч. I, 2000. — 224 С; Ч. II, 2002. — 551 С; Ч. III, 2003. — 504 С.
3. Бекиров Т. М. Первичная переработка природных газов.— М.: Химия, 1987.— 256 С.
4. Богданов Н.Д., Переверзев А.Н. Депарафинизация нефтьяных продуктов. М: Химия, 1978, 248 С.
5. Бардик, Д. Л. Нефтьехимия [Текст] / Д. Л. Бардик, У. Л. Леффлер; пер. с англ. – М.: Олимп-Бизнес, 2003. – 416 С: ил.
6. Дусткобилов, Э. Н., Каршиев, М. Т., Неъматов, Х. И., & Бойтемиров, О. Э. (2019). СЕРОВОДОРОДНЫЕ ЗАГРЯЗНЕНИЯ ОКРУЖАЮЩЕЙ СРЕДЫ И СПОСОБЫ ИХ УТИЛИЗАЦИИ. Международный академический вестник, (5), 67-69.
7. Каршиев, М. Т., Дусткобилов, Э. Н., Неъматов, Х. И., & Бойтемиров, О. Э. (2019). Селективное окисление сероводорода кислородом воздуха. Международный академический вестник, (5), 70-73.
8. Каршиев, М. Т., Неъматов, Х. И., Бойтемиров, О. Э., & Дусткобилов, Э. Н. (2019). ИССЛЕДОВАНИЕ ФУНКЦИОНАЛЬНЫХ СВОЙСТВ СИНТЕЗИРУЕМЫХ АЛЮМО-НИКЕЛЬ-МОЛИБДЕНОВЫХ КАТАЛИЗАТОРОВ ГИДРООЧИСТКИ. Международный академический вестник, (5), 73-79.
9. Ziyamukhamedova, U., Rakhmatov, E., & Nafasov, J. (2021, April). Optimization of the composition and properties of heterocomposite materials for coatings obtained by the activation-heliotechnological method. In Journal of Physics: Conference Series (Vol. 1889, No. 2, p. 022056). IOP Publishing. DOI: https://doi.org/10.1088/1742-6596/1889/2/022056
10. Ziyamukhamedova, U., Djumabaev, A., Urinov, B., & Almatayev, T. (2021). Features of structural adaptability of polymer composite coatings. In E3S Web of Conferences (Vol. 264, p. 05011). EDP Sciences. DOI: https://doi.org/10.1051/e3sconf/202126405011
11. Bozorov, O. N., Rakhmatov, E. A., Dustkobilov, E. N., & Ziyamukhamedova, U. A. (2020). Creation and application of corrosion-resistant coatings on the basis of modified local angrene kaolins and epoxy compounds. Journal of critical reviews, 7(16), 2945-2950.
12. Бозоров, О. Н., Рахматов, Э. А., Дустқобилов, Э. Н., & Зиямухамедова, У. А. (2020). Модификацияланган маҳаллий ангрен каолинлари ва эпоксид компаундлари асосида коррозиябардош қопламалар яратиш ва уларни амалда қўллаш. Инновацион технологиялар, (3 (39)), 48-54.
13. Boboniyozovich, R. K., Dilmurodovna, D. S., Dzhabborovna, I. H., Nurmamatovich, D. E., & Abdikhafizovich, R. E. (2019). Amperometric titration of mercury (II) with mphcmdedtc-a nitrogen-and-sulfur-containing reagent. European science review, (3-4), 129-132. DOI: https://doi.org/10.29013/ESR-19-3.4-129-132