STUDY OF FACTORS INFLUENCING THE EFFECTIVENESS OF ABSORPTIONAL GAS PURIFICATION
Main Article Content
Abstract
It was studied that the increase in the process of absorption purification of natural gas from acidic components is closely related to hydrodynamic, geometric, and physicochemical factors, as well as the location, configuration, and direction of the colliding axes of the nozzles within the column. Based on such problems, studies were conducted on geometric factors, physicochemical factors related to the fact that the influence of certain factors creates serious difficulties in experimental studies, the influence of phase density and viscosity, and collision movement processes in turbulent flows.
Downloads
Article Details
Issue
Section

This work is licensed under a Creative Commons Attribution 4.0 International License.
Public License Terms
(For Open Journal Systems (OJS))
-
Copyright:
The copyright of the published article remains with the author(s). However, after publication, the article is distributed on the OJS platform under the Creative Commons (CC BY) license. -
License Type:
This article is distributed under the Creative Commons Attribution 4.0 International (CC BY 4.0) license. This means users can utilize the article under the following conditions:- Copy and distribute: The text of the article or its parts can be freely distributed.
- Quote and analyze: Parts of the article can be used for quoting and analysis.
- Free use: The article can be freely used for research and educational purposes.
- Attribution: Users must provide proper attribution and reference to the original source.
-
Commercial use:
The article can be used for commercial purposes, provided that authorship and source are properly cited. -
Document modification:
The text or content of the article can be modified or adapted, as long as it does not harm the authorship. -
Liability disclaimer:
The author(s) are responsible for the accuracy of the information contained in the article. The editorial team of the platform is not liable for any damages resulting from the use of this information. -
Public usage obligations:
The content of the article must be used only in accordance with legal and ethical standards. Unauthorized use is strictly prohibited.
Note:
These license terms are designed to ensure transparency and openness in material usage. By accepting these terms, you agree to the adaptation and distribution of the article content under the terms of the Creative Commons license.
Link: Creative Commons Attribution 4.0 International (CC BY 4.0)
How to Cite
References
[1] Современные технологии переработки сероводородсодержащих природных газов. (1998). Газовая промышленность, (7).
[2] Гриценко, А. И., Галанин, И. А., Зиновиева, Л. М., & Мурин, В. И. (1985). Очистка газов от сернистых соединений при эксплуатации газовых месторождений. Недра.
[3] ГОСТ 51.40-93. (1993). Газы горючие природные, поставляемые и транспортируемые по магистральным газопроводам: Технические условия.
[4] Николаев, В. В., Бусыгина, Н. В., & Бусыгин, И. Г. (1998). Основные процессы физической и физико-химической переработки газа. Недра.
[5] Айнштейн, В. Г., Захаров, М. К., Носов, Г. А., и др. (2003). Общий курс процессов и аппаратов химической технологии (Кн. 2). Логос; Высшая школа.
[6] Семенова, Т. А., и др. (1997). Очистка технологических газов. Химия.
[7] Lin, C.-Y., Soriano, A. N., & Li, M.-H. (2009). Mass transfer characteristics in gas purification processes. Journal of the Taiwan Institute of Chemical Engineers, 40(4), 403–412. DOI: https://doi.org/10.1016/j.jtice.2008.11.002
[8] Хафизов, Ф. Ш., Афанасенко, В. Г., & Хафизов, Н. Ф. (2007). Кавитирование жидкой фазы как способ интенсификации массообменных процессов. Естественные и технические науки, (4), 267–268.
[9] Юлдашев, Т. Р. (2023). Моделирование процесса очистки углеводородных газов от кислых компонентов. Композиционные материалы, (2), 59–62.
[10] Yuldashev, T. R., Makhmudov, M. J., & Svaykosov, S. O. (2022). Modern liquid-phase methods for gas feed sulfur purification. Science and Education in Karakalpakstan, 3/1(26), 31–35.
[11] Чуракова, С. К., & Богатых, К. Ф. (2013). Разработка ресурсо-энергосберегающих технологий фракционирования на основе конструктивно-технологического подхода. Технологии нефти и газа, (4), 8–14.