IMPACT ON THE ROCK MASS IN DRILLING AND BLASTING OPERATION
Article Sidebar
Main Article Content
Abstract
This article analyzes the separation of the rock mass during underground mining through drilling and blasting operations, as well as the determination of the fracture degree of rock formations using software tools. In determining the fracture degree of rock formations, the rock mass was classified into blocks, and the average separation sizes for different types of rock compositions were identified. The density and distribution characteristics of natural fractures within the internal structure of the rock formations were also examined.
Downloads
Article Details
Issue
Section
This work is licensed under a Creative Commons Attribution 4.0 International License.
Public License Terms
(For Open Journal Systems (OJS))
-
Copyright:
The copyright of the published article remains with the author(s). However, after publication, the article is distributed on the OJS platform under the Creative Commons (CC BY) license. -
License Type:
This article is distributed under the Creative Commons Attribution 4.0 International (CC BY 4.0) license. This means users can utilize the article under the following conditions:- Copy and distribute: The text of the article or its parts can be freely distributed.
- Quote and analyze: Parts of the article can be used for quoting and analysis.
- Free use: The article can be freely used for research and educational purposes.
- Attribution: Users must provide proper attribution and reference to the original source.
-
Commercial use:
The article can be used for commercial purposes, provided that authorship and source are properly cited. -
Document modification:
The text or content of the article can be modified or adapted, as long as it does not harm the authorship. -
Liability disclaimer:
The author(s) are responsible for the accuracy of the information contained in the article. The editorial team of the platform is not liable for any damages resulting from the use of this information. -
Public usage obligations:
The content of the article must be used only in accordance with legal and ethical standards. Unauthorized use is strictly prohibited.
Note:
These license terms are designed to ensure transparency and openness in material usage. By accepting these terms, you agree to the adaptation and distribution of the article content under the terms of the Creative Commons license.
Link: Creative Commons Attribution 4.0 International (CC BY 4.0)
How to Cite
References
1. Мусахан А.Б. Автоматизированное проектирование рациональных параметров взрывных работ при проходке подземных горизонтальных выработок // Диссертация. Республика Казахстан Алматы, 2023. 33-40 ст.
2. Мислибаев И.Т., Нурхонов Х.A. Методика расчета параметров для гладкого взрывания для обеспечения сохранности проектного контура в условиях рудника Каракутан//Oriental Renaissance: Innovative, educational, natural and social sciences. ‒ Vol. 2. ‒ Issue 9. ‒ Tashkent, 2022. ‒ pp. 412-421. ISSN 2181-1784 (SJIF 2022: 5.947).
3. Фугзан М.И. Изучение действия взрыва в предварительно напряженной среде // Физико-технические исследования разработки и обогащения руд. М.: 1973 . –248 с.
4. Nurkhonov Kh.A., Misliboev I.T. Design of contour explosion parametrs // Web of scientist: international scientific research journal. ‒ Indonesia, Nov., 2022. ‒ Vol. 3. ‒ Issue 11. (WoS) ‒ pp. 605-611. ISSN: 2776-0979 (SJIF 2022: 5.949).
5. Нурхонов Х.A. Способы снижения интенсивности выбросов породы с использованием зарядов специальной конструкции//Oriental Renaissance: Innovative, educational, natural and social sciences. ‒ Vol. 2. ‒ Issue 6. ‒ Tashkent, 2022. ‒ pp. 536-540. ISSN 2181-1784 (SJIF 2022: 5.947).
6. Андреев Р.Е. Повышение эффективности контурного взрывания при проходке горных выработок глубоких горизонтов подземных рудников // Дисс…канд. тех.наук.-Санкт-Петербург, 2009. –137 с.
7. Нурхонов Х.A. Классификация методов контурного взрывания подземной разработки месторождений полезных ископаемых // Горный вестник Узбекистана. – Навои, 2019. – №4. – С. 55-56 (05.00.00; №7).
8. Нурхонов Х.A., Каримов Ё.Л., Хужакулов А.М., Латипов З.Л. Методика расчета параметров контурного взрывания предварительного щелеобразования // Горный вестник Узбекистана. ‒ Навои, 2020. – №2. – С. 83-86 (05.00.00; №7).
9. Akbarov T.G., Toshtemirov U.T., Nurkhanov Kh., Khojakulov A. Recommended Support Structures for Excavations in Difficult Mining and Geological Conditions // International Journal of Advanced Research in Science, Engineering and Technology (IJARSET). ‒ India, February 2020. ‒ Vol. 7. ‒ Issue 2. ‒ pp. 12798-12802 (05.00.00; №8).
10. Nurxonov X.A., Mansurova S.A. Qisqa muddatli portlash sodir bo‘lganda tog‘ jinslarining buzilish radiusini aniqlash orqali burg‘ulash-portlatish ishlari pasporti parametrlarini ishlab chiqish // Oriental Renaissance: Innovative, educational, natural and social sciences. ‒ Vol. 1. ‒ Issue 1. ‒ Tashkent, 2021. ‒ рр. 147-150. ISSN 2181-1784 (SJIF 2021: 5.423).
11. Нурхонов Х.A. Результаты исследования характера распределения напряжений вокруг зарядов сложной конструкции // Oriental Renaissance: Innovative, educational, natural and social sciences. ‒ Vol. 2. ‒ Issue 5/2. ‒ Tashkent, 2022. ‒ pp. 756-760. ISSN 2181-1784 (SJIF 2022: 5.947).
12. Нурхонов Х.A., Мислибаев И.Т., Назаров З.С. Обоснование конструкций шпурового заряда для контурного взрывания при проходке горизонтальных подземных выработок // Инновационные технологии. – Карши, 2022. – №3. ‒ С. 3-6. (05.00.00; №38).