FREQUENCY CONTROL OF THE OPERATING MODE OF ELECTRICAL PROCESSES OF PUMPING DEVICES

Article Sidebar

HTML PDF (Uzbek)
Published: 18.03.2025
DOI: https://doi.org/10.70769/3030-3214.SRT.3.1.2025.35
Keywords:
pumping device, electric drive, operating mode, energy saving, economic efficiency, pump, short circuit rotor asynchron motor, control reley, frequency converter, automation tools

Main Article Content

Khamzaev, A.A.
Доцент кафедры «Горная электромеханика» Навоийского государственного горно-технологического университета, Навои, Узбекистан , Navoiy davlat konchilik va texnologiyalar universiteti “Kon elektromexanikasi” kafedrasi dotsenti, Navoiy, O‘zbekiston , Docent of the Department of "Mining Electrical Mechanics" of the Navoi State Mining and Technological University, Navoi, Uzbekistan
Sharopov, D.D.
Инженер-энергетик Главного энергетического управления «НГМК», Навои, Узбекистан , “NKMK” Bosh energetika boshqarmasining energetik muhandisi, Navoiy, O‘zbekiston , Energy engineer of the Main Energy Department of “NMMC”, Navoi, Uzbekistan
Fayzullaev, K.K.
Магистрант по направлению «Электрификация и автоматизация горных работ», Навоийский государственный горно-технологический университет, Навои, Узбекистан , Navoiy davlat konchilik va texnologiyalar universiteti, Konchilik ishlarini elektrlashtirish va avtomatlashtirish yo‘nalishi magistranti, Navoiy, O‘zbekiston , Master's student in the field of electrification and automation of mining operations, Navoi State Mining and Technological University, Navoi, Uzbekistan

Abstract

This article analyzes the improvement of the operating mode of pumping equipment with electric drives based on frequency control methods. Frequency control systems are of great importance in increasing the efficiency of pumps, reducing energy consumption, and ensuring their stability. Based on theoretical data and practical research, the article provides comprehensive information on various methods of controlling pumps with electric drives and their impact on operating parameters. The studied methods serve to save energy in production processes, maximize results during operation, and ensure uninterrupted operation of pumps. The practical application and efficiency of control systems, as well as future prospects, are considered as one of the main areas of the topic.

Downloads

Download data is not yet available.

Article Details

Issue

Vol. 3 No. 1 (2025)

Section

Chemical Technology and Construction
Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

Public License Terms
(For Open Journal Systems (OJS))

  1. Copyright:
    The copyright of the published article remains with the author(s). However, after publication, the article is distributed on the OJS platform under the Creative Commons (CC BY) license.

  2. License Type:
    This article is distributed under the Creative Commons Attribution 4.0 International (CC BY 4.0) license. This means users can utilize the article under the following conditions:

    • Copy and distribute: The text of the article or its parts can be freely distributed.
    • Quote and analyze: Parts of the article can be used for quoting and analysis.
    • Free use: The article can be freely used for research and educational purposes.
    • Attribution: Users must provide proper attribution and reference to the original source.

  3. Commercial use:
    The article can be used for commercial purposes, provided that authorship and source are properly cited.

  4. Document modification:
    The text or content of the article can be modified or adapted, as long as it does not harm the authorship.

  5. Liability disclaimer:
    The author(s) are responsible for the accuracy of the information contained in the article. The editorial team of the platform is not liable for any damages resulting from the use of this information.

  6. Public usage obligations:
    The content of the article must be used only in accordance with legal and ethical standards. Unauthorized use is strictly prohibited.

Note:
These license terms are designed to ensure transparency and openness in material usage. By accepting these terms, you agree to the adaptation and distribution of the article content under the terms of the Creative Commons license.

Link: Creative Commons Attribution 4.0 International (CC BY 4.0)

How to Cite

Khamzaev , A. A., Sharopov , D. D., & Fayzullaev , K. K. (2025). FREQUENCY CONTROL OF THE OPERATING MODE OF ELECTRICAL PROCESSES OF PUMPING DEVICES. Digital Technologies in Industry, 3(1), 195-200. https://doi.org/10.70769/3030-3214.SRT.3.1.2025.35

References

1. B.Toshov, A. Khamzayev. Development of Technical Solutions for the Improvement of the Smooth Starting Method of High Voltage and Powerful Asynchronous Motors// AIP Conference Proceedings 2552, 040017 (2023). DOI: https://doi.org/10.1063/5.0116131

2. L. N. Atakulov, O. E. Sheshko. Increasing the economic efficiency of the operation of the high-angle conveyor KNK-270 of the Navoi mining and smelting plant. Printed Mining Information and Analytical Bulletin. Mining informational and analytical bulletin. No. 5/2019. pp.181-188. DOI: https://doi.org/10.25018/0236-1493-2019-05-0-181-188

3. R.U. Djuraev, D.N. Xatamova , Q. Normayev. Improving the operational efficiency of drilling rock-breaking tools//International Scienentific SiberianTrasport Forum-TransSiberia. - 402, - 2023. DOI: https://doi.org/10.1051/e3sconf/202340210018

4. Abduazizov N.A., Muzaffarov A,Toshow J.B., Juraev R.U. ,Zhuraev A.Sh. (2020). A Complex of methods for analyzing the working fluid of a hydrostatic power plant for hydraulic mining machines. International Journal of Advanced Science and Technology, 29(5s), 852 - 855.

5. Toshov J.B. The questions of the dynamics of drilling bit on the surface of well bottom// Arch. Min. Sci. - Poland. - Vol. 61 (2016), № 2, P. 279-287. DOI: https://doi.org/10.1515/amsc-2016-0020