STUDY OF THE INFLUENCE OF SAND MANIFESTATION ON THE OPERATING MODES OF PUMPING EQUIPMENT IN THE CONDITIONS OF THE KYZYLKUM REGION

Article Sidebar

HTML (Russian) PDF (Russian)
Published: 19.05.2025
DOI: https://doi.org/10.70769/3030-3214.SRT.3.2.2025.22
Keywords:
sand manifestation, pumping equipment, sand removal intensity from the reservoir, methods for reducing sand manifestations in wells, equipment wear, pump operation optimization

Main Article Content

Qurbonov, O.M.
Доцент (PhD), Докторант (DSc) Навоийского государственного горно-технологического университета, Навоий, Узбекистан , Navoiy davlat konchilik va texnologiyalar universiteti dotsenti (PhD), doktoranti (DSc), Navoiy, O‘zbekiston , Associate Professor (PhD), Doctoral Student (DSc) of Navoi State Mining and Technological University, Navoi, Uzbekistan
https://orcid.org/0009-0000-7699-0520 (unauthenticated)
Atakulov, L.N.
Профессор (DSc), Заведующий кафедры «Горная электромеханика» Навоийского государственного горно-технологического университета, Навоий, Узбекистан , Navoiy davlat konchilik va texnologiyalar universiteti “Konchilik elektromexanikasi” kafedrasi professori (DSc), mudiri, Navoiy, O‘zbekiston , Professor (DSc), Head of the Department of “Mining Electromechanics” of the Navoi State Mining and Technological University, Navoi, Uzbekistan
https://orcid.org/0000-0002-3561-8850 (unauthenticated)
Safarova, M.D.
Докторант (PhD) Навоийского государственного горно-технологического университета, Навоий, Узбекистан , Navoiy davlat konchilik va texnologiyalar universiteti doktoranti (PhD), Navoiy, O‘zbekiston , Doctoral student (PhD) of Navoi State Mining and Technological University, Navoi, Uzbekistan

Abstract

The article presents an analysis of technological methods aimed at studying the consequences of sand manifestations in wells in the Kyzylkum region. The main causes of sand manifestations and their impact on pump operation, including damage to working parts, decrease in pressure characteristics, and increase in repair frequency, are considered.

Downloads

Download data is not yet available.

Article Details

Issue

Vol. 3 No. 2 (2025)

Section

Mining, Metallurgy, and Manufacturing Industry
Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

Public License Terms
(For Open Journal Systems (OJS))

  1. Copyright:
    The copyright of the published article remains with the author(s). However, after publication, the article is distributed on the OJS platform under the Creative Commons (CC BY) license.

  2. License Type:
    This article is distributed under the Creative Commons Attribution 4.0 International (CC BY 4.0) license. This means users can utilize the article under the following conditions:

    • Copy and distribute: The text of the article or its parts can be freely distributed.
    • Quote and analyze: Parts of the article can be used for quoting and analysis.
    • Free use: The article can be freely used for research and educational purposes.
    • Attribution: Users must provide proper attribution and reference to the original source.

  3. Commercial use:
    The article can be used for commercial purposes, provided that authorship and source are properly cited.

  4. Document modification:
    The text or content of the article can be modified or adapted, as long as it does not harm the authorship.

  5. Liability disclaimer:
    The author(s) are responsible for the accuracy of the information contained in the article. The editorial team of the platform is not liable for any damages resulting from the use of this information.

  6. Public usage obligations:
    The content of the article must be used only in accordance with legal and ethical standards. Unauthorized use is strictly prohibited.

Note:
These license terms are designed to ensure transparency and openness in material usage. By accepting these terms, you agree to the adaptation and distribution of the article content under the terms of the Creative Commons license.

Link: Creative Commons Attribution 4.0 International (CC BY 4.0)

How to Cite

Qurbonov , O. M., Atakulov , L. N., & Safarova , M. D. (2025). STUDY OF THE INFLUENCE OF SAND MANIFESTATION ON THE OPERATING MODES OF PUMPING EQUIPMENT IN THE CONDITIONS OF THE KYZYLKUM REGION. Digital Technologies in Industry, 3(2), 60-65. https://doi.org/10.70769/3030-3214.SRT.3.2.2025.22

References

1. Лобачев. П.В. «Насосы и насосные станции» М. строиздат.2000.

2. Быстрицкий Г. Ф. Энергосиловое оборудование промышленных предприятий: учебное пособие / Г. Ф. Быстрицкий. - 2-е издание., стер. - М. : Издательский центр «Академия», 2005. - 304 с.

3. M. Bogdevicius, J. Januteniene, R. Didziokas, S. Razmas, V. Skrickij, P. Bogdevicius. Investigation of the hydrodynamic processes of a centrifugal pump in a geothermal system. Transport. Lithuania. 2018. Volume 33 (1). – P. 223-230. DOI: https://doi.org/10.3846/16484142.2016.1155079

4. Atakulov L.N., Kurbonov O. M. Исследование по повышению работоспособности насосного оборудования // Journal of Advances in Engineering Technology. Vol.1(1). 2020/ - 21-24 p.p.

5. Makhmudov A., Kurbonov O. M., Safarova M. D. Research of the pressure characteristics of the centrifugal water drainage plant of the WCP 25-60G brand // Australian Journal of Science and Technology. ‒ Australia, June 2020. ‒ Vol. 4. ‒ Issue 2. ‒ рр. 279-282 (23. Scientific Journal Impact Factor. Импакт-фактор 5,99).

6. Махмудов А.М., Курбонов О.М. The method and arrangement to increase the efficiency and utilization of submersible pumping equipment // Горный вестник Узбекистана. ‒ Навои, 2021. ‒ №1. – С. 4-7 (05.00.00. №7).

Most read articles by the same author(s)

Similar Articles

You may also start an advanced similarity search for this article.