CALCULATION OF THE EFFICIENCY OF HEAT TRANSFER THROUGH THE RIBBED SURFACE OF THE PYROLYSIS REACTOR
Article Sidebar
Main Article Content
Abstract
In this article, the thermal parameters of the biomass pyrolysis thermal processing device were calculated. Also, the flow of flue gas at a temperature of 500-600 ℃ during the pyrolysis process, its movement on the ribbed surfaces of the pyrolysis reactor, and its effect on the water boiler on the outer wall of the reactor were studied. The bioreactor is made of the "pipe in a pipe" type, pyrolysis of biomass takes place in its inner pipe, and water is heated in the outer pipe due to the heat lost to the environment. At the same time, the internal pipe of the reactor allows obtaining gaseous fuel by thermal processing of biomass, and the heat in the external pipe of the boiler solves the problem of providing consumers with hot water in the heating system. The proposed device thermally processes agricultural biomass waste and provides autonomous consumers with alternative fuels and thermal energy at the same time.
Downloads
Article Details
Section
This work is licensed under a Creative Commons Attribution 4.0 International License.
Public License Terms
(For Open Journal Systems (OJS))
-
Copyright:
The copyright of the published article remains with the author(s). However, after publication, the article is distributed on the OJS platform under the Creative Commons (CC BY) license. -
License Type:
This article is distributed under the Creative Commons Attribution 4.0 International (CC BY 4.0) license. This means users can utilize the article under the following conditions:- Copy and distribute: The text of the article or its parts can be freely distributed.
- Quote and analyze: Parts of the article can be used for quoting and analysis.
- Free use: The article can be freely used for research and educational purposes.
- Attribution: Users must provide proper attribution and reference to the original source.
-
Commercial use:
The article can be used for commercial purposes, provided that authorship and source are properly cited. -
Document modification:
The text or content of the article can be modified or adapted, as long as it does not harm the authorship. -
Liability disclaimer:
The author(s) are responsible for the accuracy of the information contained in the article. The editorial team of the platform is not liable for any damages resulting from the use of this information. -
Public usage obligations:
The content of the article must be used only in accordance with legal and ethical standards. Unauthorized use is strictly prohibited.
Note:
These license terms are designed to ensure transparency and openness in material usage. By accepting these terms, you agree to the adaptation and distribution of the article content under the terms of the Creative Commons license.
Link: Creative Commons Attribution 4.0 International (CC BY 4.0)
How to Cite
References
1. Uzoqov G‘.N., Davlonov X.A.. Gelioissiqxonalarning energiya tejamkor isitish tizimlari. Monografiya, - T.: «Voris-nashriyot», 2019. 144 bet.
2. В. В. Хасхачих, О. М. Ларина, Г. А. Сычев, Г. Я. Герасимов, В. М. Зайченко, Пиролитические методы термической переработки твердых коммунальных отходов, ТВТ, 2021, том 59, выпуск 3, 467–480. DOI: https://doi.org/10.31857/S0040364421030078
3. Uzakov, G. N, Davlonov X. A, Rustamov S. Sh. Biomassa pirolizi tajribalarining mahsulot balansi tahlili. G. N. Uzakov. Muqobil energetika. – 2023. – Vol. 9, No. 2. – P. 48-55.
4. Бухмиров В.В. Тепломассообмен: Учебник в 2-х т. Т.I/ФГБОУВО «Ивановский государственный энергетический университет имени В.И. Ленина». – Иваново, 2023. – 364 с.
5. Совершенствование тепловой работы туннельных печей для обжига керамических изделий: автореферат диссертации на соискание ученой степени кандидата технических наук: 05.14.04 / Ракутина Дарья Валериевна. - Иваново, 2006. - 26 с.
6. Таймаров М. А., Ахметова Р. В., Маргулис С. М., Касимова Л. И. Влияние кавитационной обработки на выгорание частиц мазута в топках котлов // Известия вузов. Проблемы энергетики. 2018. №9-10. (дата обращения: 14.11.2024).
7. Терех А. М., Шаповал О. Е., Письменный Е. Н. Среднеповерхностный теплообмен в поперечно-омываемых коридорных пучках труб с разрезным спиральноленточным оребрением // Промышленная теплотехника. – 2001. – Т. 23 – № 1-2 – с. 35- 41.
8. Юдин В.Ф. Теплообмен поперечно-оребренных труб. – Л.: Машиностроение, 1982. – 189 с.
9. Письменный Е. Н., Терех А. М. Обобщенный метод расчета конвективного теплообмена поперечно-омываемых пучков труб с внешним кольцевым и спиральноленточным оребрением // Теплоэнергетика. – 1993. – № 5. – с. 52-56.
10. Tony B. Challenges and Opportunities in Fast Pyrolysis of Biomass: Part I, Johnson Matthey Technology Review, Volume 62, Issue 1, Jan 2018, p. 118 – 130. DOI: https://doi.org/10.1595/205651318X696693
11. Uzoqov.G.N., Rustamov.S.Sh. Biochiqindilarni qayta ishlash zarurati va mamlakatdagi biomassa xom ashyo zaxirasi. Educational Research in Universal Sciences ISSN: 2181-3515 Volume 2. Special issue 5. 2023.
12. Rustamov Suhrob Shuhrat o‘g‘li. Efficiency of Thermal Recycling of Biowaste in the Energy Supply System of Greenhouses. (2022). The Peerian Journal, 10, 5–9.