SOF, CHIQINDI, QAYTA ISHLANGAN VA PLASTIFIKATSIYALGAN POLIURETAN NAMUNALARINING QIYOSIY TERMOGRAVIMETRIK TAHLILI

Main Article Content

Shodiev, A.F.
Muhiddinov, B.F.
Jurayev, S.T.
Shokirov, R.K.

Abstract

This article presents a study of pure, waste, recycled, and plasticized polyurethane samples using thermogravimetric analysis and differential scanning calorimetry. The main objective of the study was to determine the effect of polyurethane waste recycling and plasticization processes on the thermal stability and molecular structure of the polymer and to evaluate the possibility of retaining its properties compared with the pure polyurethane sample. The thermogravimetric results showed that thermal degradation of all investigated samples occurs in two or three stages. The process involves the cleavage of (–NH–CO–O–), carbonyl (–COO–), and ether (–C–O–C–) bonds, degradation of the main polymer chain, formation of CO₂, CO, NH₃, water vapor, and other volatile organic products, as well as thermal oxidation of carbonized residues. The thermal characteristics of pure, waste, recycled polyurethane based on a 4,4-methylenediphenyl diisocyanate oligomer, and polyurethane plasticized using ethylene glycol and glycerin were investigated, including mass loss under temperature exposure, degradation rate, and the initial and final degradation temperatures. The total sample mass and experimental conditions were kept identical for all five samples. The obtained results scientifically substantiate the possibility of producing polymer materials with improved physical and mechanical properties through the recycling of polyurethane waste.

Downloads

Download data is not yet available.

Article Details

Section

Chemical Technology and Construction

Author Biographies

Shodiev, A.F., Navoi State Mining and Technologies University

PhD in technical sciences, deputy dean of the Faculty of Agroengineering and Communication Technologies, Navoi State Mining and Technologies University, Navoi, Uzbekistan

Muhiddinov, B.F., Navoi State Mining and Technologies University

Candidate of Chemical Sciences, professor of the Department of Chemical Technology, Navoi State Mining and Technologies University, Navoi, Uzbekistan

Jurayev, S.T., Navoi State Mining and Technologies University

Doctor of Technical Sciences, professor, dean of the Faculty of Agroengineering and Communication Technologies, Navoi State Mining and Technologies University, Navoi, Uzbekistan

Shokirov, R.K., Navoi State Mining and Technologies University

Basic doctoral student, Department of Agronomy, Navoi State Mining and Technologies University, Navoi, Uzbekistan

How to Cite

Shodiev, A. F., Muhiddinov, B. F., Jurayev, S. T., & Shokirov, R. K. (2026). COMPARATIVE THERMOGRAVIMETRIC ANALYSIS OF VIRGIN, WASTE, RECYCLED, AND PLASTICIZED POLYURETHANE SAMPLES. Digital Technologies in Industry, 4(3), 268-276. https://doi.org/10.70769/3030-3214.SRT.4.3.2026.38

References

[1] Islomova, N. A. Q., & Qamariddin, O. (2022). Yuqori molekulyar birikmalarni fizik-kimyoviy tadqiqot usullari asosida o‘rganish. Academic Research in Educational Sciences, 3(2), 877–884.

[2] Mendiburu-Valor, E., et al. (2023). Thermoset polyurethanes from biobased and recycled components. Journal of Polymers and the Environment, 31(11), 4946–4959. DOI: https://doi.org/10.1007/s10924-023-02891-1

[3] Eshmatov, A. M., et al. (2021). Dispers to‘ldiruvchili polimer-polimer komplekslar asosidagi kompozitsion materiallar. Academic Research in Educational Sciences, 2(2), 334–341.

[4] Mârșolea, A. C., et al. (2023). Design of polyurethane composites obtained from industrial plastic wastes, pyrite and red mud. Construction and Building Materials, 405, 133319. DOI: https://doi.org/10.1016/j.conbuildmat.2023.133319

[5] Лутфуллаев, С. Ш., & Бекназаров, Э. М. (2021). Исследование физико-химических и механических свойств полимеров из промышленных отходов при их вторичной переработке. Universum: технические науки, 12(93). https://7universum.com/ru/tech/archive/item/12769

[6] Мазурин, В. Л. (2013). Полиуретан как конструкционный материал XXI века. Глобальная энергия, 2(171), 165–170.

[7] Бакирова, И. Н., & Минеева, Т. А. (2024). Синтез термопластичного полиуретана с использованием в качестве удлинителя цепи ароматического диола и разработка на его основе клеевых композиций. Известия высших учебных заведений. Химия и химическая технология, 67(11), 106–113.

[8] Shodiyev, A., Mukhiddinov, B., & Kiyomov, S. (2022). Effect of change of polyethropoliol amount on the physical-mechanical properties of thermoreactive polyurethane. Universum: технические науки, 10(103). https://7universum.com/ru/tech/archive/item/14396 DOI: https://doi.org/10.32743/UniTech.2022.103.10.14396

[9] Abu-Jdayil, B., et al. (2022). Utilization of polyurethane foam dust in development of thermal insulation composite. Buildings, 12(2), 126. DOI: https://doi.org/10.3390/buildings12020126

[10] Xo‘jaqulov, K. R., et al. (2023). Ikkilamchi polimer chiqindilarini granulalash va ularni qayta ishlash. Science and Education, 4(6), 418–423.

[11] Shaker, A., et al. (2023). Thermo-mechanical characterization of electrospun polyurethane/carbon-nanotubes nanofibers: A comparative study. Scientific Reports, 13(1), 17368. DOI: https://doi.org/10.1038/s41598-023-44020-x

[12] Захаров, А. Е. (2025). Термогравиметрический анализ наномодифицированного материала для внешнего огнезащитного слоя оболочек полимерных эластичных резервуаров. Современные проблемы гражданской защиты, 4(57), 19–28.

Most read articles by the same author(s)