СРАВНИТЕЛЬНЫЙ АНАЛИЗ ЦИФРОВЫХ МОДЕЛЕЙ РЕЛЬЕФА COPERNICUS DEM GLO-30 И FABDEM ДЛЯ ГИДРОЛОГИЧЕСКОГО МОДЕЛИРОВАНИЯ ПОЙМЕННЫХ ТЕРРИТОРИЙ
Main Article Content
Abstract
The paper presents a comparative GIS-based analysis of two global digital elevation models — Copernicus DEM GLO-30 and its modified version FABDEM (Forest And Buildings removed Copernicus DEM) — as a base for subsequent hydrological modeling of surface runoff in floodplain areas. The study object is a site in the Pukhovichi district of the Minsk region, representing an active open-cast peat extraction site with a developed drainage network. It is shown that, owing to the removal of forest and building bias, the FABDEM surface is on average 0.5–0.7 m lower than the DEM GLO-30 surface, while local discrepancies within forested floodplain sections reach 10–16 m and are spatially confined to the boundaries of forest tracts and built-up areas. Such relief artefacts of DEM GLO-30 are shown to be capable of forming spurious damming ridges and distorting the direction and volume of simulated surface runoff during subsequent hydrological modeling. It is concluded that FABDEM should be preferred as the base surface for constructing hydrologically consistent digital elevation models of floodplain territories, including tasks of geoecological monitoring of technologically impacted open-cast mining sites.
Downloads
Article Details
Section

This work is licensed under a Creative Commons Attribution 4.0 International License.
Public License Terms
(For Open Journal Systems (OJS))
-
Copyright:
The copyright of the published article remains with the author(s). However, after publication, the article is distributed on the OJS platform under the Creative Commons (CC BY) license. -
License Type:
This article is distributed under the Creative Commons Attribution 4.0 International (CC BY 4.0) license. This means users can utilize the article under the following conditions:- Copy and distribute: The text of the article or its parts can be freely distributed.
- Quote and analyze: Parts of the article can be used for quoting and analysis.
- Free use: The article can be freely used for research and educational purposes.
- Attribution: Users must provide proper attribution and reference to the original source.
-
Commercial use:
The article can be used for commercial purposes, provided that authorship and source are properly cited. -
Document modification:
The text or content of the article can be modified or adapted, as long as it does not harm the authorship. -
Liability disclaimer:
The author(s) are responsible for the accuracy of the information contained in the article. The editorial team of the platform is not liable for any damages resulting from the use of this information. -
Public usage obligations:
The content of the article must be used only in accordance with legal and ethical standards. Unauthorized use is strictly prohibited.
Note:
These license terms are designed to ensure transparency and openness in material usage. By accepting these terms, you agree to the adaptation and distribution of the article content under the terms of the Creative Commons license.
Link: Creative Commons Attribution 4.0 International (CC BY 4.0)
How to Cite
References
[1] Hawker, L., Uhe, P., Paulo, L., Sosa, J., Savage, J., Sampson, C., & Neal, J. (2022). A 30 m global map of elevation with forests and buildings removed. Environmental Research Letters, 17(2), 024016. https://doi.org/10.1088/1748-9326/ac4d4f DOI: https://doi.org/10.1088/1748-9326/ac4d4f
[2] European Space Agency, & Airbus Defence and Space. (2022). Copernicus DEM global and European digital elevation model (GLO-30, GLO-90): Product handbook. Copernicus.eu.
[3] Yamazaki, D., Ikeshima, D., Sosa, J., Bates, P. D., Allen, G. H., & Pavelsky, T. M. (2019). MERIT Hydro: A high-resolution global hydrography map based on latest topography datasets. Water Resources Research, 55(6), 5053–5073. https://doi.org/10.1029/2019WR024873 DOI: https://doi.org/10.1029/2019WR024873
[4] Антоненко, А. Г., & Семченко, А. С. (2021). Применение интерполяции в геоинформационных системах. In Е. В. Бильдюк (Ed.), Безопасность промышленного предприятия: инженерные и управленческие решения: сборник материалов XIX Международной научно-практической конференции (p. 217). БНТУ.
[5] Бильдюк, Е. В., & Астапенко, Т. С. (2021). Решение комплекса горных задач на базе анализа пространственно-распределенных данных геостатистическими методами. In Инновационные геотехнологии при разработке рудных и нерудных месторождений: материалы X Международной научно-технической конференции (pp. 187–190). Екатеринбург.
[6] Бильдюк, Е. В., & Павловский, А. И. (2024). Использование геоинформационной системы Surfer для анализа водосборных бассейнов. In Экологическая культура и охрана окружающей среды: IV Дорофеевские чтения: материалы международной научно-практической конференции (pp. 294–295). ВГУ им. П. М. Машерова. EDN OVFAMA.
[7] Вишневская, А. И. (2022). Использование геоинформационной системы Surfer при анализе влияния поверхностных вод на карьерное поле. In Е. В. Бильдюк (Ed.), Перспективы инновационно-технологического и экономического развития минерально-сырьевого комплекса: сборник материалов XX Международной научно-практической конференции (Vol. 2, p. 116). БНТУ.
[8] Кунцевич, В. Б., Курзо, Б. В., Гайдукевич, О. М., Макаренко, Т. И., Агейчик, И. В., Татков, А. Ю., & Калилец, Л. П. (2024). Методика расчета физико-технических и эксплуатационных характеристик карбонатного сапропеля при применении скважинной гидродобычи. Природопользование, (2), 123–130.
[9] Павловский, А. И., Кологривко, А. А., Нарыжнова, Е. Ю., & Бильдюк, Е. В. (2026). Методика пространственно-временного анализа трансформации геологической среды техногенно нагруженных территорий с применением программного обеспечения «КРЕДО Анализ пространственных данных». Цифровые технологии в промышленности, 4(1). https://doi.org/10.70769/3030-3214.SRT.4.1.2026.23 DOI: https://doi.org/10.70769/3030-3214.SRT.4.1.2026.23