MAVHUM QAYNASH QATLAMLI QURITISH QURILMASINI MODELLASHTIRISH VA OPTIMALLASHTIRISH
Main Article Content
Abstract
This paper presents a mathematical model of a fluidized bed drying apparatus and analyzes the effects of the main technological parameters on the drying process. The model considers hydrodynamic conditions, heat and mass transfer between the gas and solid phases, as well as mass and energy balances. The Archimedes and Reynolds numbers were used to determine the minimum fluidization velocity. According to the calculation results, the minimum fluidization velocity was 0.86 m/s, while the operating gas velocity was set at 1.20 m/s. The results indicate that increasing the gas temperature and velocity intensifies the drying process. The developed mathematical model makes it possible to evaluate the final moisture content, drying rate, and drying time, and to justify an optimal technological operating regime.
Downloads
Article Details
Section

This work is licensed under a Creative Commons Attribution 4.0 International License.
Public License Terms
(For Open Journal Systems (OJS))
-
Copyright:
The copyright of the published article remains with the author(s). However, after publication, the article is distributed on the OJS platform under the Creative Commons (CC BY) license. -
License Type:
This article is distributed under the Creative Commons Attribution 4.0 International (CC BY 4.0) license. This means users can utilize the article under the following conditions:- Copy and distribute: The text of the article or its parts can be freely distributed.
- Quote and analyze: Parts of the article can be used for quoting and analysis.
- Free use: The article can be freely used for research and educational purposes.
- Attribution: Users must provide proper attribution and reference to the original source.
-
Commercial use:
The article can be used for commercial purposes, provided that authorship and source are properly cited. -
Document modification:
The text or content of the article can be modified or adapted, as long as it does not harm the authorship. -
Liability disclaimer:
The author(s) are responsible for the accuracy of the information contained in the article. The editorial team of the platform is not liable for any damages resulting from the use of this information. -
Public usage obligations:
The content of the article must be used only in accordance with legal and ethical standards. Unauthorized use is strictly prohibited.
Note:
These license terms are designed to ensure transparency and openness in material usage. By accepting these terms, you agree to the adaptation and distribution of the article content under the terms of the Creative Commons license.
Link: Creative Commons Attribution 4.0 International (CC BY 4.0)
How to Cite
References
[1] Nguyen, V. D., Nguyen, T. V. L., Nguyen, N. A., Kharaghani, A., & Le, K. H. (2026). Fluidized bed drying modeling: Impact of initial solid mass on drying kinetics. Chemie Ingenieur Technik, 98, 292–303. https://doi.org/10.1002/cite.70064 DOI: https://doi.org/10.1002/cite.70064
[2] Liu, T., Yin, Y., & He, D. (2026). Numerical simulation of pharmaceutical particle drying in a gas-solid fluidized bed using the CPFD method. Drying Technology, 44(2), 217–231. https://doi.org/10.1080/07373937.2025.2608266 DOI: https://doi.org/10.1080/07373937.2025.2608266
[3] Nadda, M., Banaeizadeh, A., Avilala, P., Roy, S., & Yadav, A. (2025). Coupled computational fluid dynamics-discrete element method (CFD-DEM) modeling of moisture removal in a fluidized bed dryer for heterogeneously coated solids. Chemical Engineering Science, 316, 121811. https://doi.org/10.1016/j.ces.2025.121811 DOI: https://doi.org/10.1016/j.ces.2025.121811
[4] Chen, H., Yang, C., Miyazaki, T., Kim, Y.-D., Shahzad, M. W., & Thu, K. (2025). Mathematical modeling of fluidized bed drying system: Review and state of the art. Evergreen, 12(2), 1336–1368. https://doi.org/10.5109/7363513 DOI: https://doi.org/10.5109/7363513
[5] Yang, K., Li, X., Wang, Y., & Du, X. (2025). CFD-DEM simulation study on heat and mass transfer of wheat particles in gas-solid fluidized bed. Journal of Food Process Engineering, 48(1), e70036. https://doi.org/10.1111/jfpe.70036 DOI: https://doi.org/10.1111/jfpe.70036
[6] Zanone, A., Zamboni do Carmo, G., Ropke, M., Penteriche, M. R. D., Calciolari, R. M., & Andreola, K. (2025). Predicting moisture content in microcrystalline cellulose during fluidized bed drying using machine learning techniques. Journal of Food Process Engineering, 48(5), e70119. https://doi.org/10.1111/jfpe.70119 DOI: https://doi.org/10.1111/jfpe.70119
[7] Billah, M. T., Zannat, N. E., Hossain, M. A., Sachcha, I. H., Yasmin, S., & Sarker, M. S. H. (2025). Process optimization of fluidized bed drying for water spinach: Evaluating the effect of blanching through RSM and ANN models. Food Science & Nutrition, 13(4), e70114. https://doi.org/10.1002/fsn3.70114 DOI: https://doi.org/10.1002/fsn3.70114
[8] Touil, A., Gritli, S., & Taieb, A. (2025). Mathematical modeling of batch fluidized bed drying of alumina. American Journal of Mechanics and Applications, 12(1), 11–21. https://doi.org/10.11648/j.ajma.20251201.12 DOI: https://doi.org/10.11648/j.ajma.20251201.12
[9] de Munck, M. J. A., Peters, E. A. J. F., & Kuipers, J. A. M. (2024). CFD-DEM modeling and validation of solids drying in a gas-fluidized bed. Chemical Engineering Science, 291, 119922. https://doi.org/10.1016/j.ces.2024.119922 DOI: https://doi.org/10.1016/j.ces.2024.119922
[10] Jin, H., Wu, Q., Wang, S., & He, Y. (2024). Heat and mass transfer performance of non-spherical wet particles in a fluidized bed dryer. Applied Thermal Engineering, 236, 121780. https://doi.org/10.1016/j.applthermaleng.2023.121780 DOI: https://doi.org/10.1016/j.applthermaleng.2023.121780
[11] Simanjuntak, M. E., Sitorus, M. B. H., Kamila, I., & Ginting, B. B. (2024). Kinetic analysis and mathematical modeling of low-rank coal drying by using swirl fluidized bed dryer on varied angles of guide vane and temperatures. Energy Sources, Part A: Recovery, Utilization, and Environmental Effects, 46(1), 3263–3277. https://doi.org/10.1080/15567036.2024.2317435 DOI: https://doi.org/10.1080/15567036.2024.2317435
[12] Ma, Z., Tu, Q., Liu, Z., Xu, Y., Ge, R., & Wang, H. (2023). CFD-DEM investigation of the gas-solid flow characteristics in a fluidized bed dryer. Chemical Engineering Research and Design, 196, 235–253. https://doi.org/10.1016/j.cherd.2023.06.054 DOI: https://doi.org/10.1016/j.cherd.2023.06.054
[13] Vandeputte, T., Ghijs, M., Van Hauwermeiren, D., Schultz, E. D. S., Schäfer, E., Stauffer, F., De Beer, T., & Nopens, I. (2023). Mechanistic modeling of semicontinuous fluidized bed drying of pharmaceutical granules by incorporating single particle and bulk drying kinetics. International Journal of Pharmaceutics, 646, 123447. https://doi.org/10.1016/j.ijpharm.2023.123447 DOI: https://doi.org/10.1016/j.ijpharm.2023.123447
[14] Hasibuan, R., Sari, W. N., Manurung, R., & Alexander, V. (2023). Drying kinetic models of rice applying fluidized bed dryer. Mathematical Modelling of Engineering Problems, 10(1), 334–339. https://doi.org/10.18280/mmep.100138 DOI: https://doi.org/10.18280/mmep.100138
[15] Tu, Q., Ma, Z., & Wang, H. (2023). Investigation of wet particle drying process in a fluidized bed dryer by CFD simulation and experimental measurement. Chemical Engineering Journal, 452, 139200. https://doi.org/10.1016/j.cej.2022.139200 DOI: https://doi.org/10.1016/j.cej.2022.139200