INFLUENCE OF THE DISTANCE BETWEEN CONTOUR HOLES AND THE HOLE APPROACH COEFFICIENT ON THE EFFICIENCY OF CONTOUR BLASTS

Article Sidebar

HTML (Uzbek) PDF (Uzbek)
Published: 20.12.2024
DOI: https://doi.org/10.70769/3030-3214.SRT.2.4-1.2024.14
Keywords:
contour blasting, borehole distance, convergence coefficient, rocks, explosion products

Main Article Content

Nurkhonov, Kh.A.
Каршинский инженерно-экономический институт, доцент кафедры геологии и горного дела, к.т.н. (PhD), Карши, Узбекистан , Qarshi muhandislik-iqtisodiyot instituti, Geologiya va konchilik ishi kafedrasi dotsenti t.f.f.d. (PhD), Qarshi, O‘zbekiston , Karshi Engineering-Economics institute, Associate Professor, Department of Geology and Mining, Doctor of Philosophy (PhD), Karshi, Uzbekistan
Bakirov, G.Kh.
Доцент кафедры «Горное дело» Алмалыкского филиала Ташкентского государственного технического университета имени Ислама Каримова, Алмалык, Узбекистан , Islom Karimov nomidagi Toshkent davlat texnika universiteti Olmaliq filiali “Konchilik ishi” kafedrasi dotsenti, Olmaliq, O‘zbekiston , Associate Professor, Department of Mining, Almalyk Branch of Tashkent State Technical University named after Islam Karimov, Almalyk, Uzbekistan

Abstract

The article highlights research aimed at improving the efficiency of contour blasting technology in underground mine workings. The authors analyzed the influence of the distance between boreholes and the convergence coefficient on the blasting process and developed methods for optimizing contour charges. The experiments considered the hardness of rocks and the type of explosives. The results enable more efficient organization of blasting operations in mine workings.

Downloads

Download data is not yet available.

Article Details

Issue

Vol. 2 No. 4-1 (2024): Special number

Section

Mining, Metallurgy, and Manufacturing Industry
Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

Public License Terms
(For Open Journal Systems (OJS))

  1. Copyright:
    The copyright of the published article remains with the author(s). However, after publication, the article is distributed on the OJS platform under the Creative Commons (CC BY) license.

  2. License Type:
    This article is distributed under the Creative Commons Attribution 4.0 International (CC BY 4.0) license. This means users can utilize the article under the following conditions:

    • Copy and distribute: The text of the article or its parts can be freely distributed.
    • Quote and analyze: Parts of the article can be used for quoting and analysis.
    • Free use: The article can be freely used for research and educational purposes.
    • Attribution: Users must provide proper attribution and reference to the original source.

  3. Commercial use:
    The article can be used for commercial purposes, provided that authorship and source are properly cited.

  4. Document modification:
    The text or content of the article can be modified or adapted, as long as it does not harm the authorship.

  5. Liability disclaimer:
    The author(s) are responsible for the accuracy of the information contained in the article. The editorial team of the platform is not liable for any damages resulting from the use of this information.

  6. Public usage obligations:
    The content of the article must be used only in accordance with legal and ethical standards. Unauthorized use is strictly prohibited.

Note:
These license terms are designed to ensure transparency and openness in material usage. By accepting these terms, you agree to the adaptation and distribution of the article content under the terms of the Creative Commons license.

Link: Creative Commons Attribution 4.0 International (CC BY 4.0)

How to Cite

Nurkhonov , K. A., & Bakirov , G. K. (2024). INFLUENCE OF THE DISTANCE BETWEEN CONTOUR HOLES AND THE HOLE APPROACH COEFFICIENT ON THE EFFICIENCY OF CONTOUR BLASTS. Digital Technologies in Industry, 2(4-1), 31-36. https://doi.org/10.70769/3030-3214.SRT.2.4-1.2024.14

References

1. Нурхонов Х.A. Результаты исследования характера распределения напряжений вокруг зарядов сложной конструкции // Oriental Renaissance: Innovative, educational, natural and social sciences. ‒ Vol. 2. ‒ Issue 5/2. ‒ Tashkent, 2022. ‒ pp. 756-760. ISSN 2181-1784 (SJIF 2022: 5.947).

2. Нурхонов Х.A., Мислибаев И.Т., Назаров З.С. Обоснование конструкций шпурового заряда для контурного взрывания при проходке горизонтальных подземных выработок // Инновационные технологии. – Карши, 2022. – №3. ‒ С. 3-6. (05.00.00; №38).

3. Мислибаев И.Т., Нурхонов Х.A. Методика расчета параметров для гладкого взрывания для обеспечения сохранности проектного контура в условиях рудника Каракутан // Oriental Renaissance: Innovative, educational, natural and social sciences. ‒ Vol. 2. ‒ Issue 9. ‒ Tashkent, 2022. ‒ pp. 412-421. ISSN 2181-1784 (SJIF 2022: 5.947).

4. Андреев Р.Е. Повышение эффективности контурного взрывания при проходке горных выработок глубоких горизонтов подземных рудников // Дисс…канд. тех.наук.-Санкт-Петербург, 2009. –137 с.

5. Фугзан М.И. Изучение действия взрыва в предварительно напряженной среде // Физико-технические исследования разработки и обогащения руд. М.: 1973 . –248 с.

6. Nurkhonov Kh.A., Misliboev I.T. Design of contour explosion parametrs // Web of scientist: international scientific research journal. ‒ Indonesia, Nov., 2022. ‒ Vol. 3. ‒ Issue 11. (WoS) ‒ pp. 605-611. ISSN: 2776-0979 (SJIF 2022: 5.949).

7. Нурхонов Х.A. Способы снижения интенсивности выбросов породы с использованием зарядов специальной конструкции // Oriental Renaissance: Innovative, educational, natural and social sciences. ‒ Vol. 2. ‒ Issue 6. ‒ Tashkent, 2022. ‒ pp. 536-540. ISSN 2181-1784 (SJIF 2022: 5.947).

8. Нурхонов Х.A. Классификация методов контурного взрывания подземной разработки месторождений полезных ископаемых // Горный вестник Узбекистана. – Навои, 2019. – №4. – С. 55-56 (05.00.00; №7).

9. Нурхонов Х.A., Каримов Ё.Л., Хужакулов А.М., Латипов З.Л. Методика расчета параметров контурного взрывания предварительного щелеобразования // Горный вестник Узбекистана. ‒ Навои, 2020. – №2. – С. 83-86 (05.00.00; №7).

10. Akbarov T.G., Toshtemirov U.T., Nurkhanov Kh., Khojakulov A. Recommended Support Structures for Excavations in Difficult Mining and Geological Conditions // International Journal of Advanced Research in Science, Engineering and Technology (IJARSET). ‒ India, February 2020. ‒ Vol. 7. ‒ Issue 2. ‒ pp. 12798-12802 (05.00.00; №8).

11. Nurxonov X.A., Mansurova S.A. Qisqa muddatli portlash sodir bo‘lganda tog‘ jinslarining buzilish radiusini aniqlash orqali burg‘ulash-portlatish ishlari pasporti parametrlarini ishlab chiqish // Oriental Renaissance: Innovative, educational, natural and social sciences. ‒ Vol. 1. ‒ Issue 1. ‒ Tashkent, 2021. ‒ рр. 147-150. ISSN 2181-1784 (SJIF 2021: 5.423).

12. Нурхонов Х.A. Результаты исследования характера распределения напряжений вокруг зарядов сложной конструкции // Oriental Renaissance: Innovative, educational, natural and social sciences. ‒ Vol. 2. ‒ Issue 5/2. ‒ Tashkent, 2022. ‒ pp. 756-760. ISSN 2181-1784 (SJIF 2022: 5.947).

13. Нурхонов Х.A., Мислибаев И.Т., Назаров З.С. Обоснование конструкций шпурового заряда для контурного взрывания при проходке горизонтальных подземных выработок // Инновационные технологии. – Карши, 2022. – №3. ‒ С. 3-6. (05.00.00; №38).

Most read articles by the same author(s)

Similar Articles

You may also start an advanced similarity search for this article.